Loading ...
-
WATER COOLING CHILLER
The water-cooled chiller adopts a shell and tube condenser, which has fast heat conduction and good heat dissipation effect. It can provide ice water at 5~35℃, and the low temperature type can be as low as 3℃ (the temperature... moreWATER COOLING CHILLER
The water-cooled chiller adopts a shell and tube condenser, which has fast heat conduction and good heat dissipation effect. It can provide ice water at 5~35℃, and the low temperature type can be as low as 3℃ (the temperature difference does not exceed ±1℃), the compressor power is from 3HP to 50HP, and the cooling capacity can reach 8251~132359Kcal/hr.
#water #cooled #water #chiller
https://www.cnsoxi.com/products/water-cooling-chiller/ less
-
WATER COOLED SCREW CHILLER
The water-cooled screw refrigeration unit adopts a shell and tube condenser, which has fast heat conduction and good heat dissipation effect. It can provide ice water at 5~35℃, and the low temperature type can be as low as... moreWATER COOLED SCREW CHILLER
The water-cooled screw refrigeration unit adopts a shell and tube condenser, which has fast heat conduction and good heat dissipation effect. It can provide ice water at 5~35℃, and the low temperature type can be as low as 3℃ (the temperature difference does not exceed ±1℃), the compressor power is from 40HP to 560HP, and the cooling capacity can reach 100362~1520480Kcal/hr.
#water #cooled #screw #chiller #working #principle
https://www.cnsoxi.com/products/water-cooled-screw-chiller/ less
-
The welding water cooler is a compact, economical, energy-saving and heat-dissipating circulating cooler, which has the characteristics of portability, convenient operation and long service life. It is mainly used to help cool the heating parts of... moreThe welding water cooler is a compact, economical, energy-saving and heat-dissipating circulating cooler, which has the characteristics of portability, convenient operation and long service life. It is mainly used to help cool the heating parts of mechanical equipment such as AC and DC argon arc welding equipment, gas shielded welding equipment, plasma equipment resistance welding machine, laser machine and so on.
Precautions For Welding Water Cooler In Winter
Add and replace the cooling water timely. Please use pure water for cooling water
Alcohol antifreeze must be replaced in winter to avoid damaging the radiator
Precautions For The First Use Of Welding Water Cooler
Make sure that the injected cooling water (pure water) is is enough
#water #cooled #welder
https://www.xlntchillers.com/products/welding-water-cooler/ less
-
S11 Type 10kv Series Low Loss Distribution Transformer
General introduction of S11 Type 10kv Series Low Loss Distribution Transformer
S11 power transformer is in development at S9 series transformer.It is in low loss, low noise, capable of short-circuit,... moreS11 Type 10kv Series Low Loss Distribution Transformer
General introduction of S11 Type 10kv Series Low Loss Distribution Transformer
S11 power transformer is in development at S9 series transformer.It is in low loss, low noise, capable of short-circuit, good impact resistance and Well-run performance.
It applies new type insulation structure and improves the ability of short-circuit resistance.The iron core is made of high-quality cold-rolled silicon-steel plate.High-voltage winding group is made of high quality copper wires and it adopts multilayer cylindrical structure.All fasteners have been processed with special treatment to prevent them from loosening.
Environmental conditions of S11 Type 10kv Series Low Loss Distribution Transformer
1.Type:Outdoor
2.Normal Service Conditions:
3.The height above the sea level is below 1000m;
4.Ambient temperature: Highest air temperature+40 ℃, Lowest air temperature-25℃
5.Relative air humidity:≤90%(+25℃)
6.installation site: no corrosion gas, No obvious dirt
For Agricultural power distribution and lighting
Transformer Standard of S11 Type 10kv Series Low Loss Distribution Transformer
GB1094.1~2-1996 power transformer
GB1094.3,5-2003 power transformer
GB/T6451-2008 Three phase oil immersed power transformer
Model description:
transformer Model description
Features of S11 Type 10kv Series Low Loss Distribution Transformer:
A.Good heat emission, big overload capacity. Can work without wind machine for long time under 130 overload, and be full load without compulsive wind cool without capacity descending under IP45 condition.
B.Perfect safe and resistance to fire operating can be combusting for long period under 800ºC and without smoke
C.Strong resistance to thermal shock(can be full load immediately at -50ºC)
D.Complete waterproof and airproof.
E.No partial discharge
F. Good hydrophobility and good resistance to alkaline cauterization and fundal influence
G. Environmental, low noise, no deleerious gas, easy to decomposition.
#oil #cooled #distribution #transformer #dry #manufacturer
http://www.zjyb-electric.com/product/s11-10kv-series-low-loss-distribution-transformer.html less
Loading ...
There are no more results to show.
Find in Members
Find in Projects
Find in Channels
